top of page

Sony TA-N220 Stereo Amplifier with Walnut Side Panels VGC - Serviced and Tested by DALAUDIO with solid wood side panels walnut stained. The unit is in good operating condition, and the output has been tested per the service manual. The Sony TA-N220 is a highly versatile, vintage multi-channel power amplifier originally introduced around 1985–1990. It is highly regarded by audio enthusiasts for its unique ability to switch flexibly between 2, 3, or 4-channel configurations, making it a great tool for bi-amping setups, driving separate zones, or acting as a powerful bridged stereo amplifier. The amplifier is built around Sony's proprietary Super Legato Linear (S.L.L.) circuit technology, which minimizes switching noise and reduces crossover distortion to deliver a warmer, cleaner analog output. We have two of these units available (see last few photos), priced each at the above price.


Cash Sale No Holds Call or text for Local Pick-up Only.



Technical / Features

Normal/BTL Mode: The front panel features independent Normal/BTL (Bridge Tied Load) switches. These switches allow for the following configurations:

  • 4-Channel Mode: Drives four separate speakers at 50W each, ideal for multi-room audio, bi-amping or surround setups. When used for Bi-amping the gain controls can be very useful to set the volume for each of the speakers crossover points.


  • 3-Channel Mode: Bridges one pair of channels to run a demanding center speaker or passive subwoofer at 100W, while leaving the other two channels running independently at 50W.


  • 2-Channel (Bridged) Mode: Bridges all four channels down to a high-power 2-channel stereo amplifier pushing 100W+ per side, giving classic tower speakers plenty of headroom.


Input Gain Attenuators: Alongside Input Gain Level attenuators for channels 1-2 and 3-4. The gain control allows independent speaker level adjustments. This essentially allows you to configure the amp to match many different system demands. This includes:


  • Speaker Efficiency Matching: The gain controls are very useful for matching different efficiency speakers

  • Speaker Level Control: To match closer or further speakers to the listening area.


  • Bi Amping Control: When utilized for bi-amping, the gain controls can set the volume for each of the speakers bi-amp crossover points.


  • Multi Room Systems : Setting different levels of listening in multiple rooms controlled by as single preamp in the main room.



Specifications:


Power Output (Stereo/Normal Mode): 4 x 50 Watts per channel into 6Ω.


Power Output (Bridged/BTL Mono Mode): 2 x 100 Watts per channel into 8Ω (EIAJ ratings list up to 150W into 6Ω).


Frequency Response: Ultra-wide 7Hz to 100kHz (+0/-3dB).


Total Harmonic Distortion (THD): 0.12% at full load!


Signal-to-Noise Ratio: 90dB.


Speaker Load Impedance: 6Ω to 16Ω in standard mode; 8Ω to 16Ω when bridged in BTL mode.


Physical Characteristics: Weights roughly 10 kg (22 lbs)


Aesthetic: We have made real wood walnut stained side panels for these amplifiers that give it an elegant, classic era aesthetic.

Sony TA-N220 Stereo Amplifier with Walnut Side Panels VGC

SKU: TA-N220
$350.00Price
Quantity

    ©2023 by DALAUDIO LLC.  

    • alt.text.label.Facebook
    • eProsellers
    bottom of page