QSC PLX 1202 Stereo Power Amplifier 200 WPC in good overall condition. The unit was recently cleaned and tested by DALAUDIO and is in good working order. The gain pots have been treated and capped to protect from dust. This unit utilizes QSC PowerWave (a switching power supply instead of a large heavy toroidal supply) to provides current to the circuitry, resulting in clean, powerful audio, reduced heat generation, and lighter weight! The PLX1202 features balanced XLR and unbalanced 1/4-inch TRS inputs, and Speakon and binding post outputs for speakers. The power is 200WPC at 8 ohms, 325 watts per channel at 4 ohms, and up to 1200 watts in bridged mono mode at 4 ohms. This is a compact 2RU rackmount design (2 rack spaces), 13 inches deep that has moderate weight making transport much easier. If you need a manual please bring a USB drive.
Cash Sale No Holds Call or text for Pick-up
Features.
- LED Indicators: The PLX 1202 has a single green power on LED; each channel has a series of three signal LEDs (Signal, -20dB, -10db) and a red Clip LED (one per channel) will illuminate if amplifier is being driven into clipping or distortion. Finally a yellow LEDs indicate when the amplifier is set to parallel or bridged mono mode.
- Inputs: XLR and 1/4" TRS
- Outputs: Speakon and Binding posts
- Power output: 200 watts per channel into 8Ω (stereo), 700 watts into 8Ω (mono)
- Frequency response: 20Hz to 20kHz
- Total harmonic distortion: 0.03%
- Damping factor: 500
- Gain: 32 dB
- Input sensitivity: 1V
- Signal to noise ratio: 106dB
- Speaker load impedance: 4Ω (minimum)
- Dimensions: 19 x 3.5 x 13.25 inches