The Crown CE2000 is a 2-channel power amplifier known for its power output and performance. The unit was recently cleaned serviced and tested by DALAUDIO. This unit delivers 400W per channel into 8 ohms, 660W into 4 ohms, and a blistering 975W into 2 ohms in stereo mode. The amplifier (24 NPN TO3) is designed for use with various load impedances and is considered safe with all types of loads. The unit features selective input sensitivity of either 1.4V for 32db gain or 2.83V for 26 dB gain. Inputs include XLR (Balanced), 1/4 TS (Unbalanced) or Screw Terminals for either. If you need some 1/4" to RCA for your application let us know as we have the available. We also have NL4FC connectors for speaker output as well as speaker cables, let us know if you need them. Please see all photos.

Cash Sale No Holds Call or text for Pick-up.

Power Output:
Stereo Mode: 8 ohms: 400W per channel, 4 ohms: 660W per channel, 2 ohms: 975W per channel
Bridged-Mono Mode: 8 ohms: 1320W, 4 ohms: 1950W

General Specifications:
Input Impedance: 20k ohms (balanced), 10k ohms (unbalanced)
Input Sensitivity: 1.4 volts for 1kHz power, or 26 dB gain
Frequency Response: +/- 0.2 dB from 20 Hz to 25 kHz at 1 watt
THD (Total Harmonic Distortion): 1-kHz rated power, 0.5% or less true THD from 20 Hz to 20 kHz
Signal to Noise Ratio: Better than 105 dB below rated 1-kHz power (A-weighted)
Damping Factor: Greater than 400 from 10 Hz to 400 Hz
Voltage Gain: 32.1 dB at 1.4-volt sensitivity, 26 dB at 2.83-volt sensitivity
Output Connectors: Two Neutrik Speakon NL4MP

Additional Features:
Protection: The amplifier includes protection circuitry for radio frequency interference (RFI) and current overload.
Standby Mode: It features a standby mode to protect the amplifier from overheating.
Switchable Modes: The CE2000 can be switched between stereo and bridged-mono modes.
Front Panel Controls: It has an on/off switch, input level controls, and a reset switch.